Marine Plywood and Panels

Teak & Holly Cabin Sole Teak stripe 2 3/8" wide, white lines 1/4" Mahogany back and core, WBP water and boil proof glue.  FSC Certified, CARB ...

 Good 1 Side Flat Sliced Teak Plywood. Teak face is 6mm thick and has teak faced veneer before sanding, and a Mahogany core and back. Water and bo...

BS 1088 Meranti Plywood 48" x 96" 1mm face veneers before sanding with equal or nearly equal laminations with water and boil proof (WBP) glue. Core...

All Noah’s Okoume plywood is European made, meets BS1088 standard and is Lloyd’s certified and is available in 48” x 98.5”and 60” x 122”.  Okoume i...

BS6566 Meranti Plywood 48" X 96" BS 1088 has 1mm face veneers, void free core with equal or nearly equal core laminations.  BS 6566 has slightly th...

With the impressive and high strength-to-weight ratio, this is easily considered Coosa’s most robust panel. The woven roving and continuous strands...

King StarBoard® is the original marine grade polymer and the industry standard. It is the product of a proprietary process called K Stran™, the mos...

All Noah’s Okoume marine plywood is European made, meets BS1088 standard and is Lloyd’s certified and is available in 48” x 98.5”and 60” x 122”.  T...

Sapele (African Mahogany hardwood) faces & core, 1.3 mm face veneers (before sanding.) Equal or nearly equal laminations. Water and boil proof ...

Bluewater 20 is a medium-density (20 lb/ft³), polyurethane foam board reinforced with layers of continuous strand fiberglass, as well as woven rovi...

Quarter sawn veneer gives solid Mahogany look. Great for interior furniture, bulkheads, traditional runabout decks. Mahogany core with WBP glue. Co...

King StarBoard"+C2® is the original marine grade polymer and the industry standard. It is the product of a proprietary process called K Stran™, the...