3M PPS Lid & Liner Kit 16000 | 50-Pack, 200 Micron | Noah's Marine - Noah's Marine Skip to content

3M PPS Lid & Liner Kit 16000, Standard (22 fl oz, 650 mL), 200 Micron Filter

SKU 16000
by 3M
Original price $5.99 - Original price $5.99
Original price
$5.99
$5.99 - $5.99
Current price $5.99

3M™ PPS™ Lid & Liner Kit 16000 is the official standard (22 fl oz / 650 mL) lid and liner kit for the original 3M Paint Preparation System (legacy PPS). This listing is one kit and, per 3M, contains 50 disposable lids with welded-in 200-micron filters, 50 disposable liners and 20 sealing plugs. 3M specifies this product for industrial or occupational use only; it is not for consumer sale or use.

What’s in the kit

  • 50 disposable lids with a welded-in 200-micron filter
  • 50 disposable liners sized for the standard 650 mL (22 fl oz) cup
  • 20 sealing plugs

The reusable standard hard cup and collar (3M part 16001) is not included and is sold separately. A spray-gun adapter for the original PPS system is also sold separately, unless you are using a gun that accepts original PPS lids directly. 3M notes that the Accuspray ONE spray gun can be used with original PPS lids without a separate adapter.

Legacy PPS only — not Series 2.0

This kit is designed only for 3M PPS (legacy) cups and collars. It is not an Accuspray atomizing head, and it is not compatible with 3M PPS Series 2.0 lids, liners or cups. Legacy lids use a separate screw-on collar on the hard cup. Series 2.0 lids use a quarter-turn lock and a different adapter; they will not interchange. For Series 2.0 standard 650 mL lids and liners, see the 12-pack refill 26173 and the 50-kit with hard cup, 26000.

Always confirm the filter mesh with the coating manufacturer. This kit is the 200-micron version, often used with traditional solvent-borne materials. The 125-micron standard lid-and-liner kit is a different part (16026) and is not this item.

Using the kit

3M’s technical data sheet gives this basic sequence: insert a disposable liner in the hard cup and mix the coating in the liner; place the lid on the cup and push down until it clicks; fit the collar and tighten it onto the outer cup; then push and twist the correct adapter into the lid until it locks. After spraying, disconnect the air line, invert the gun and pull the trigger so unused material returns to the liner. A sealing plug can close unused coating, following local rules. Dispose of used lids and liners according to local requirements. Because this is a closed system, 3M states that the gun can be sprayed in any orientation, including upside down.

Product specifications

Property Details
Brand / system 3M™ PPS™ (legacy Paint Preparation System)
3M part number 16000
3M ID 7010029840
UPC 00051131160002
Cup size Standard
Capacity Fits the legacy PPS standard 650 mL (22 fl oz) cup and collar (part 16001, sold separately)
Filter 200 micron, welded into each lid
Pack 50 lids, 50 liners and 20 sealing plugs per kit, 1 kit per case
Not included Hard cup and collar (16001) and spray-gun adapter
Materials (3M TDS) Liner: LDPE. Lid: polypropylene. Filter: Nylon 6
Compatibility Legacy PPS only. Not compatible with PPS Series 2.0
Intended use Industrial / occupational. Not for consumer sale or use

Downloads

3M does not publish a product Safety Data Sheet for these plastic lids and liners in the documents located for this listing. The technical data sheet directs users to the Safety Data Sheet for the paint or solvent being mixed, together with local regulations, for safe use, storage and disposal. Use the personal protective equipment required by a workplace risk assessment and by the coating manufacturer.