Flow Media
Resin Flow 60 Infusion Netting 60"
AIRTECH INTERNATIONALResinflow 60 is designed to assist resin flow through your part during the VARTM (Vacuum Assisted Resin Transfer Moulding) process. This material i...
View full detailsPoly Tubing 1/2" OD 3/8" ID
AIRTECH INTERNATIONALPolyethylene Tubing is used to connect the vacuum reservoir to the part to be infused. Available with a 1/2" O.D. and a 3/8" I.D. for use with 3/8"...
View full detailsEnka Channel 50 4MM X 50MM
Enka FusionEnkachannel for resin infusionEnka-Channel is a 50 mm wide, 4 mm thick, supply or feeder channel for VARTM, consisting of a black three-dimensional...
View full detailsEnka Channel 100 4MM X 100MM
Enka FusionEnka-Channel is a 100 mm wide, 4 mm thick, supply or feeder channel for VARTM, consisting of a black three-dimensional polyester filament core stru...
View full detailsSpiral Wrap 1/2" OD X 100'
AIRTECH INTERNATIONALAirTech Spiral Wrap air duct infusion hose is used to allow air, and eventually excess resin, to be pulled from the perimeter of a molded product. ...
View full detailsNylon Barb T Fitting 3/8 X 3/8 X 3/8
AIRTECH INTERNATIONALUsed to connect polyethylene tubing and/or spiral wrap together, to make your network of vacuum infusion lines to the laminate. "Barbed" ends enabl...
View full detailsNylon Barb Elbow Fitting 3/8 X 3/8 X 3/8
AIRTECH INTERNATIONALUsed to connect polyethylene tubing and/or spiral wrap together, to make your network of vacuum infusion lines to the laminate. "Barbed" ends enabl...
View full detailsNylon Barb Coupling Fitting 3/8 X 3/8
AIRTECH INTERNATIONALUsed to connect polyethylene tubing and/or spiral wrap together, to make your network of vacuum infusion lines to the laminate. "Barbed" ends enabl...
View full details