Fasteners and Hardware

Stainless steel flat head robertson wood screws. Wood screws have coarse and deep threads to better anchor into wood. Flat head screws are used for...

The standard fastener for many boatbuilding and exterior woodworking projects. Flat head screws install flush with the surface or are countersunk a...

Used with Silicon Bronze Carriage Bolts.

Silicon Bronze Carriage Bolts (also referred to as coach bolts) are designed for through-bolting where the square neck is used to keep the bolt fro...

Silicon Bronze Carriage Bolts (also referred to as coach bolts) are designed for through-bolting where the square neck is used to keep the bolt fro...

Copper Common Nails are often used with Copper Burrs, also known as copper washers, to create a traditional copper rivet, similar to clinch or clen...

Flat washers are used typically under the head of a bolt or a nut to distribute the foces applied when tightening. Slicone Bronze is typically used...

Also known as Bronze Boat Nails, Silicon Bronze Ring Shank Nails offer a high degree of corrosion resistance combined with fastener strength. Silic...

The nylon collar prevents liquid seepage and internal corrosion. The torque lock nuts offer excellent vibration resistance and positive locking und...

Stainless Steel Flat Washer is used in applications with nuts and bolts The flat washer provides a greater bearing surface which helps prevent ...

Used where a decorative appearance is important Flat-headed screws recess into the finishing washer providing a clean appearance Finishing washers ...

Highly conformable, provides the best adhesive transfer resistance, hugs curves, contours and provides outstanding paint lines. Goes on quickly and...

Oval head robertson drive self tapping screws made of stainless steel. Sometimes called sheet metal screws or self tappers, these fasteners are com...

Finish or Trim Washers have an almost unlimited number of uses; use them to dress up screw heads when you need to leave them exposed or to convert ...

Copper Clout Nails are the preferred option for use in natural slating and are ideal for high pollution areas or coastal regions as they offer a lo...

Copper Cut Tacks are a favorite fastener used by Boatbuilders, Woodworkers, Crafters, Upholsters and Carpet Installers. Also known as Copper Flat H...

The bolt has a flat underside, a rounded top edge and the screw length is measured from the flat underside of the head to the end of the threads. S...

The standard fastener for many boatbuilding and exterior woodworking projects. Flat head screws install flush with the surface or are countersunk a...

Widely used in canoe construction, the extra-slim, long taper permits these tacks to be driven into thin strips of wood with less danger of splitti...

Hex nuts are used to connect both metal and wood components to prevent tension and movement and allow for quick disassembly for repairs and mainten...

Wood Screws are designed for wood applications and the brass is suitable where corrosion resistance is a primary consideration. The flat head style...

This MARINE GRADE stainless steel ensures that your staples will not rust or leave streaks due to corrosion when exposed to wet, humid, or salty co...

Stainless Steel Split Lock Washers provide a circular bearing surface with offset split ends which help bite into the mating material to provide ...

SEALS ANY THICKNESS ROPE END Permanent, tough and flexible rope end sealer for only pennies per application. New water-based formula is environment...