MAS Art Pro Epoxy – 1:1 UV-Resistant Art Resin Kit
MAS Art Pro is a 100% solids, 1:1 by volume clear epoxy resin made for art: resin pours, lacing, geodes, coasters, jewellery, coated artwork and small castings. UV inhibitors help keep colours from yellowing in the sun, and a 60-minute gel time gives you time to work. It cures to a hard, high-gloss, scratch-resistant finish, releases air well, self-levels and has zero VOCs.
Features
- Easy 1:1 mix ratio by volume
- 60-minute gel time (150 g at 25 °C)
- UV inhibitors for improved resistance to yellowing
- Self-levelling, high-gloss and scratch resistant
- Excellent air release, low odour and zero VOCs
- Works with pigment powders, alcohol inks and acrylic paints
Recommended Uses
- Resin art, acrylic pours, geodes and lacing
- Coasters, trays, tumblers and jewellery
- Coating artwork, canvas and wood
- Silicone mould castings and flowers
Specifications
| Property | Details |
|---|---|
| Mix ratio by volume | 1:1 |
| Mix ratio by weight | 100:84 |
| Mixed viscosity at 25 °C | 3,500 cP |
| Gel time, 150 g at 25 °C (77 °F) | 60 min |
| Hardness | Shore D 82 |
| Best working temperature | 70–80 °F (21–27 °C) |
| Kit sizes | 2 quart, 1 gallon, 2 gallon |
Mix 1–2 minutes, transfer to a second clean cup and mix another 1–2 minutes. Below 70 °F Art Pro can be too thick to release air; above 80 °F it can set too fast and overheat.
Safety and storage: MAS Art Pro Resin (Part A) is labelled WARNING: causes skin irritation; may cause an allergic skin reaction; causes serious eye irritation; suspected of damaging fertility or the unborn child; may cause damage to organs through prolonged or repeated exposure; toxic to aquatic life with long lasting effects. MAS Art Pro Hardener (Part B) is labelled DANGER: may be fatal if swallowed and enters airways; causes severe skin burns and eye damage; suspected of damaging fertility or the unborn child; very toxic to aquatic life with long lasting effects. Wear nitrile gloves, safety glasses and long sleeves, and work in a well-ventilated area. Clean uncured epoxy off skin with soap and water, never solvents. Store between 60 and 90 °F (16–32 °C) in a dry place, off cold floors and away from outside walls, and do not freeze. If the resin crystallizes, warm it to 125–140 °F (52–60 °C) and stir until clear. For safety information, refer to the Safety Data Sheets below.
Data Sheets