MAS Deep Pour Epoxy – 3:1 Clear Casting Resin for River Tables

MAS Deep Pour is a 100% solids, 3:1 by volume clear casting epoxy for river and ocean tables, casting, encapsulating and moulding. A long 5.5-hour gel time keeps exotherm down and lets bubbles rise, so you can pour 1/2 to 1 in thick per layer. It cures to a clear, glass-like finish that resists scratching and yellowing, typically within 24–36 hours at 70 °F (21 °C).

Features

• Pour 1/2–1 in (13–25 mm) per layer
• Long 5.5-hour gel time to reduce heat build-up, yellowing and cracking
• Very thin 260 cP mixed viscosity for excellent air release
• Clear, glass-like finish that resists scratching and yellowing
• Compatible with pigments and dyes
• Cures in about 24–36 hours at 70 °F (MAS figure)

Recommended Uses

• River and ocean tables
• Casting and encapsulating objects
• Moulds and thick decorative pours

Specifications

Seal wood and porous surfaces before pouring, or trapped moisture will cause foam and bubbles. Treat moulds with a release agent.

Safety and storage: MAS Deep Pour Resin (Part A) is labelled WARNING: causes skin irritation; may cause an allergic skin reaction; causes serious eye irritation; toxic to aquatic life with long lasting effects. MAS Deep Pour Hardener (Part B) is labelled DANGER: causes severe skin burns and eye damage; harmful to aquatic life with long lasting effects. Wear nitrile gloves, safety glasses and long sleeves, and work in a well-ventilated area. Clean uncured epoxy off skin with soap and water, never solvents. Store between 60 and 90 °F (16–32 °C) in a dry place, off cold floors and away from outside walls, and do not freeze. If the resin crystallizes, warm it to 125–140 °F (52–60 °C) and stir until clear. For safety information, refer to the Safety Data Sheets below.

Data Sheets