Plywood and Lumber

Whitecap's 60470 Canted teak winch pad is made from solid teak construction. Specifications include Dia. (Top): 2-1/4", Dia. (Bottom): 3", Height:...

Teak Butler table with top Outer edges fold up to form handles Tabletop is easily removed for use as a serving tray 37-1/4"W x 30"D (top open) x 2...

Inside track is 3/4" wide x 1/4" deep Outside dimension 1-3/16" x 5/8" high Sold in 5 ft. lengths Solid teak Can be used with 60826 and 60827 corne...

-Solid brass hardware-premium 100% cotton-canvas seat covers-30" high from floor to seat-folds for easy storage

2 inches in diameter Surface mount Package of two with mounting screws included

Includes 60040 director's chair and 100% cotton canvas blue seat covers. Solid teak with brass hardware. Folds for easy storage. Hand rubber oiled ...

2 inches in diameter Surface mount Package of two with mounting screws included

Includes 60040 director's chair and 100% cotton canvas blue seat covers. Solid teak with brass hardware. Folds for easy storage. Hand rubber oiled ...

Includes 60040 director's chair and 100% cotton canvas blue seat covers. Solid teak with brass hardware. Folds for easy storage. Hand rubber oiled ...

2 inches in diameter Surface mount Package of two with mounting screws included

Solid teak; 5-1/16 inches high x 3-5/8 inches wide; Hardware not included

Solid teak; Fits standard GFCI duplex receptacles; 5-1/16 inches high x 3-5/8 inches wide; 2-pack; Hardware not included

Solid teak; 5-1/16 inches high x 3-5/8 inches wide; Hardware not included

Can be drilled out and used for TV cable, phone line, etc.; 5-1/16 inches high x 3-5/8 inches wide;

Note: this is a replacement towel bar for item shown. (item shown is not included) Replacement Paper Towel Bar For 62442 and 62446

Dorade Box Waterproof Venting System • 16” L x 7” W x 5-3/8” H

Solid teak ; For use with motors up to 12 h.p. only ; Fits 7/8 inch or 1 inch railings ; 6-5/8 inches wide x 6-7/8 inches high x 1-1/2 inches thick

Cooler/Box Chocks Solid teak Set of four Each chock measures: 4-1/2” L x 4-1/2” H x 5/8” T They are removable chocks designed to keep large coolers...

Sold in pairs 3-1/4 inches long x 1-5/8 inches wide x 9/16 inch high Used to mount rod storage racks on bulkheads For mounting fishing rod storag...

8-1/2 inches long x 2-7/8 inches high x 3/4 inches thick Sold in pairs Rack sets require two (2) sets of 60609 mounting boards to mount Shown with ...

15-1/2 inches long x 2-7/8 inches high x 3/4 inches thick Sold in pairs Rack sets require two (2) sets of 60609 mounting boards to mount Shown with...

8-1/2 inches long x 2-7/8 inches high x 3/4 inches thick Sold in pairs Rack sets require two (2) sets of 60609 mounting boards to mount Shown with ...

Stainless steel and brass hardware 24 inches long x 1-3/16 inches high x 3-5/8 inches thick Mounting hardware not included