System Three

S-1 is a two-part transparent epoxy sealer. Intended for marine use, it will act as a waterproof and chemical resistant primer on a variety of subs...

EndRot Borate Powder EndRot Borate Powder is an EPA registered insecticide and fungicide for the control of wood destroying insects and rot. Use...

QuikFair is a lightweight, microballoon-filled, fast-curing two-part epoxy fairing putty with excellent moisture resistance. The two color-coded pa...

System Three Marine Spar Varnish is a high-build coating designed for marine epoxy and exterior wood surfaces such as railings, doors or any surfac...

SilverTip Epoxy is a medium-low viscosity, liquid epoxy resin system that has been optimized for coating and reinforcing fabric saturation in wood-...

WR-LPU Topcoat is a two-part linear polyurethane coating specifically formulated for maximum performance and ease of use. Available in 12 standard ...

SilverTip Epoxy is a medium-low viscosity, liquid epoxy resin system that has been optimized for coating and reinforcing fabric saturation in wood-...

SilverTip Laminating Resin is a medium-low viscosity, liquid epoxy resin system that has been optimized for coating and reinforcing fabric saturati...

For over 35 years, G-2 has been the best epoxy glue for oily, acidic hardwoods like teak and other precious tropical woods. Use it for gluing oak a...

Clear Coat is an extremely low viscosity, water white, "penetrating" epoxy system. Clear Coat cures to a brilliantly clear, very tough finish witho...

Quick Cure 5Quick Cure-5 is the standard quick setting "five minute epoxy" system. Mix at a 1:1 by volume ratio. Quick Cure is ideal for all small ...

EZ-Fillet is a wood flour-filled two-part putty specifically designed for stitch-and-glue wooden boat construction. Its ketchup-like, self-leveling...

SculpWood Putty is a one of four components making up the EndRot system. It’s a nonshrinking, two-part epoxy putty compound ideal for filling voi...

SculpWood Max is a reinforced, high-compressive strength, two-part epoxy putty compound. It has 4X the compressive strength of standard SculpWoo...

SUBMARINE UNDERWATER EPOXY Submarine is a general use, epoxy paste compound that bonds to wet surfaces by displacing water from the substrate....

RotFix is an ultra-low viscosity epoxy that penetrates deeply into soft, punky wood substrates. Unlike many popular “penetrating” epoxies, RotFix...

Why replace when you can restore? Rot is a fungus and it can spread quickly, infecting, and then destroying sound wood in its path. Replacement can...

Borate Rods are an easy, low-cost decay protection and prevention system for wood. They have an appearance similar to glass rods and are available ...

Blade Pro epoxy adhesive is a two-component, high-performance glue designed specifically for the knife maker.  This state-of-the-art adhesive forms...

MirrorCoat is a pourable, self-leveling bar and tabletop coating. It works well on many surfaces such as wood, ceramics, plaster, masonry and some ...

T-88 is a two-part, high-performance structural epoxy adhesive. Use T-88 in woodworking and marine applications. It exhibits outstanding adhesion...

GelMagic is a toughened, non-sagging, two component, structural epoxy adhesive designed for superior bonding to wood and most porous materials. It ...

Pennant Primer is a waterborne, two-part epoxy coating specifically formulated as a tough, below-the-waterline primer for marine topcoats. Though P...

Cold Cure is a blush resistant, two-part epoxy laminating and coating resin that excels in foul weather conditions.  It cures in cold, damp, and hu...