MAS Table Top Pro Epoxy Kit – 1:1 Clear Bar & Table Top Epoxy
MAS Table Top Pro is a 100% solids, 1:1 by volume clear epoxy for tables, bar tops, countertops, signs, coasters and art. It self-levels into a high-gloss, glass-like finish that resists scratching and yellowing, has excellent anti-blush properties and won't distort with age. Apply a thin seal coat first, then flood coats up to 1/8 in thick. It works with mica powders, alcohol inks and acrylic paints.
Features
- Easy 1:1 mix ratio by volume
- Self-levelling, crystal-clear high-gloss finish
- Resists scratching and yellowing
- Flood coats up to 1/8 in (3 mm) per coat
- Recoat in 4–8 hours without sanding
- 1 gallon kit covers about 12 sq ft at 1/8 in (MAS figure)
Recommended Uses
- Bar tops, table tops and countertops
- Signs, coasters and serving boards
- Coating art and embedding objects
- Small castings
Specifications
| Property | Details |
|---|---|
| Mix ratio by volume | 1:1 |
| Mix ratio by weight | 100:85 |
| Mixed viscosity at 25 °C | 3,500 cP |
| Gel time, 150 g at 25 °C (77 °F) | 40 min |
| Recoat window | 4–8 hrs without sanding; after that, scuff-sand with 220–320 grit |
| Maximum flood-coat thickness | 1/8 in (3 mm) per coat |
| Hardness | Shore D 82 |
| Best working temperature | 70–80 °F (21–27 °C) |
| Kit sizes | 2 quart, 1 gallon, 2 gallon |
Use a propane torch held about 6 in above the surface to pop bubbles. Table Top Pro resists yellowing but is not recommended for continuous outdoor UV exposure.
Safety and storage: MAS Table Top Pro Resin (Part A) is labelled WARNING: causes skin irritation; may cause an allergic skin reaction; causes serious eye irritation; toxic to aquatic life with long lasting effects. MAS Table Top Pro Hardener (Part B) is labelled DANGER: harmful if swallowed; harmful in contact with skin; causes skin irritation; causes serious eye damage; suspected of damaging fertility or the unborn child; very toxic to aquatic life with long lasting effects. Wear nitrile gloves, safety glasses and long sleeves, and work in a well-ventilated area. Clean uncured epoxy off skin with soap and water, never solvents. Store between 60 and 90 °F (16–32 °C) in a dry place, off cold floors and away from outside walls, and do not freeze. If the resin crystallizes, warm it to 125–140 °F (52–60 °C) and stir until clear. For safety information, refer to the Safety Data Sheets below.
Data Sheets