Spectrum 2 oz Gelcoat Paste Repair Kit – Invincible Stark White 2023-2027
Shipping
This product is made to order to meet your specifications and requires an estimated 2-week lead time before shipping. We appreciate your patience.
Not your colour? Find your gelcoat by boat
Invincible Stark White Gelcoat Paste Repair Kit (2023-2027)
Got a chip or scratch in your Invincible's Stark White gelcoat? This Spectrum Patch Paste kit is mixed to the Invincible Stark White colour Spectrum lists for 2023-2027 models, so small repairs blend back into the hull instead of standing out.
Kit contents
- 2 oz jar of Spectrum Patch Paste: Invincible Stark White, Spectrum colour code 31032A
- Catalyst (hardener)
- Easy-to-follow instructions
Made for
Small cosmetic damage: chips, dings, scratches and old hardware holes. Expect about 10 loonie-sized repairs per kit.
Using the kit
- Remove all damaged gelcoat and sand the area with 220 grit. Grind out any cracks first.
- Wipe clean with acetone.
- Mix 10–12 drops of catalyst into 1 oz of paste (half the jar) and fill the repair with a smooth drag. A second coat may be needed.
- After 1–2 hours of cure time, sand with 220, 400 and 600 grit and buff to a shine.
Patch Paste cannot be tinted. Spectrum recommends confirming the colour with your boat manufacturer before you order.
Important Note: These kits are custom made and require a lead time of approximately 2 weeks. Returns are not possible once ordered.
DISCLAIMER
Noah's is not responsible for verifying the color needed. Although Noah's can guarantee the color to match the factory original standard, it is possible the color will not match your specific boat due to environmental elements and mixing variables. Each kit is custom-matched to the factory color, but sun fade and weathering can make a repair look slightly different from older gelcoat, and Patch Paste can't be tinted to adjust it.
There are many methods to apply gelcoat. Noah's is not responsible for the resulting cure, or the change of color or appearance of the gelcoat due to the addition of curing agents, solvents, or thinners such as styrene.