Spectrum Gelcoat 2 oz. Paste Repair Kit – Nautique Tungsten Grey 2016-2023
Shipping
This product is made to order to meet your specifications and requires an estimated 2-week lead time before shipping. We appreciate your patience.
Not your colour? Find your gelcoat by boat
Nautique Tungsten Grey Gelcoat Paste Repair Kit (2016-2023)
Small dings deserve a proper colour match. Spectrum blends this 2 oz paste to Nautique Tungsten Grey (Spectrum code 2397, 2016-2023), so you can fix nicks and old screw holes on your wake boat without repainting a whole panel.
Choose your size
- 2 oz Paste Kit: 2 oz jar of Spectrum Patch Paste with catalyst (hardener) and instructions, for small cosmetic repairs.
- Quart or Gallon: colour-matched gelcoat only, for larger repairs. Hardener (MEKP) is not included with quarts or gallons; purchase separately.
Included with the 2 oz Paste Kit
- 2 oz jar of Spectrum Patch Paste: Nautique Tungsten Grey, Spectrum colour code 2397
- Catalyst (hardener)
- Easy-to-follow instructions
Ideal 2 oz Paste Kit repairs
Chips, nicks, light scratches and drill holes. One kit covers roughly 10 loonies' worth of small repairs.
2 oz Paste Kit step by step
- Remove all damaged gelcoat and sand the area with 220 grit. Grind out any cracks first.
- Wipe clean with acetone.
- Mix 10–12 drops of catalyst into 1 oz of paste (half the jar) and fill the repair with a smooth drag. A second coat may be needed.
- After 1–2 hours of cure time, sand with 220, 400 and 600 grit and buff to a shine.
Quart and Gallon
- Colour-matched Spectrum gelcoat only: Nautique Tungsten Grey, Spectrum colour code 2397. Quarts and gallons are gel coat, not Patch Paste.
- Hardener (MEKP) is not included with quarts or gallons; purchase separately.
- Spectrum notes that gel coat needs catalyst (MEKP) at 2% by volume (77°F) and will not fully cure without a surfacing agent such as patch aid, PVA or surface seal.
Heads up: Patch Paste kits can't be tinted. Check your colour with your boat's builder using your hull ID.
Important Note: These kits are custom made and require a lead time of approximately 2 weeks. Returns are not possible once ordered.
DISCLAIMER
Noah's is not responsible for verifying the color needed. Although Noah's can guarantee the color to match the factory original standard, it is possible the color will not match your specific boat due to environmental elements and mixing variables. Each kit is custom-matched to the factory color, but sun fade and weathering can make a repair look slightly different from older gelcoat, and Patch Paste can't be tinted to adjust it.
There are many methods to apply gelcoat. Noah's is not responsible for the resulting cure, or the change of color or appearance of the gelcoat due to the addition of curing agents, solvents, or thinners such as styrene.