3M™ Performance Gravity HVLP Atomizing Head Refill Kit 26720, Red, 2.0, 5 pack
3M Performance Gravity HVLP Atomizing Head Refill Kit 26720 is a 5-pack of 2.0 mm red nozzles for the 3M Performance Spray Gun. Official identifiers are 3M ID 7100205982 and UPC 00051131267206.
The 2.0 mm red head is the largest gravity HVLP size 3M currently lists in this family. It is the usual starting point for high-viscosity coatings, sprayable fillers and heavier primer builds; step down a size if material flow is higher than you need. Confirm the fluid-tip size with the paint manufacturer and with 3M’s official nozzle-size guide. Each pack contains five 2.0 mm heads. The official 3M bag is marked 26720, five heads and 2.0.
These heads are made exclusively for gravity-feed use with the 3M Performance Spray Gun and the 3M PPS Series 2.0 spray-cup system. They are not Accuspray atomizing heads (part numbers 16xxx / 266xx) and they are not pressure-fed Performance heads (26xxx pressure series). A Series 2.0 gun adapter is not used here — the cup threads onto the atomizing head, and the head locks onto the gun needle with 3M’s locking collar. No extra tools are required to change heads.
Coating never passes through the body of the Performance Spray Gun; it travels only through the disposable head. 3M’s technical data sheet describes cleanup as wiping the needle tip and replacing or rinsing the head, and warns: do not immerse the spray gun or nozzles in cleaning solvents or gun washers. The April 2020 data sheet lists a recommended gravity-feed air inlet pressure of 20 psi (1.38 bar) and air consumption of 13 SCFM (370 SLPM). The same 20 psi / 1.38 bar marking is moulded on the head. Starting-point nozzle sizes vary by coating and by the paint manufacturer; use 3M’s official nozzle-size guide below and the coating TDS.
Specifications
| Part number | 26720 |
|---|---|
| 3M ID | 7100205982 |
| UPC / GTIN | 00051131267206 |
| Size / colour | 2.0 mm, red |
| Quantity | 5 heads per pack |
| System | 3M Performance Spray Gun, gravity HVLP, with PPS Series 2.0 cups |
| Recommended gravity air inlet (gun TDS) | 20 psi (1.38 bar), 13 SCFM |
3M’s current gravity HVLP family includes 0.9 mm (white, 26709), 1.2 mm (blue, 26712), 1.3 mm (green, 26713), 1.4 mm (orange, 26714), 1.6 mm (purple, 26716), 1.8 mm (clear, 26718), 2.0 mm (red, 26720), and variety kit 26730 (one each of 1.2 through 2.0 mm). Fine Finish heads use a separate 269xx series. This listing is sold as a single 5-pack (or one variety kit). 3M packs five of these kits to a case.
Related items at Noah’s Marine include the 3M Performance Spray Gun System with PPS 2.0 (26778), the PPS Series 2.0 standard cup kit (26000), the 1.3 mm green and 1.8 mm clear 5-packs, and the 26730 variety kit.
Downloads
- Technical Data Sheet — 3M Performance Spray Gun (April 2020)
- Owner’s Manual — 3M Performance Spray Gun System
- Coatings and Nozzle Size Quick Reference Guide (March 2025, document 60-4405-0279-1)
3M does not publish a safety data sheet for the atomizing head itself. The April 2020 technical data sheet directs users to consult the SDS for the coating or solvent being sprayed. You can search 3M Canada’s SDS library for a current regional sheet. Read the product label and owner’s manual before use. For industrial or occupational use only; not for consumer sale or use.