System Three Epoxy

S-1 is a two-part transparent epoxy sealer. Intended for marine use, it will act as a waterproof and chemical resistant primer on a variety of subs...

EndRot Borate Powder EndRot Borate Powder is an EPA registered insecticide and fungicide for the control of wood destroying insects and rot. Use...

QuikFair is a lightweight, microballoon-filled, fast-curing two-part epoxy fairing putty with excellent moisture resistance. The two color-coded pa...

Quick Cure 5Quick Cure-5 is the standard quick setting "five minute epoxy" system. Mix at a 1:1 by volume ratio. Quick Cure is ideal for all small ...

SilverTip Laminating Resin is a medium-low viscosity, liquid epoxy resin system that has been optimized for coating and reinforcing fabric saturati...

SilverTip Epoxy is a medium-low viscosity, liquid epoxy resin system that has been optimized for coating and reinforcing fabric saturation in wood-...

Clear Coat is an extremely low viscosity, water white, "penetrating" epoxy system. Clear Coat cures to a brilliantly clear, very tough finish witho...

SilverTip Epoxy is a medium-low viscosity, liquid epoxy resin system that has been optimized for coating and reinforcing fabric saturation in wood-...

EZ-Fillet is a wood flour-filled two-part putty specifically designed for stitch-and-glue wooden boat construction. Its ketchup-like, self-leveling...

For over 35 years, G-2 has been the best epoxy glue for oily, acidic hardwoods like teak and other precious tropical woods. Use it for gluing oak a...

SculpWood Max is a reinforced, high-compressive strength, two-part epoxy putty compound. It has 4X the compressive strength of standard SculpWoo...

SUBMARINE UNDERWATER EPOXY Submarine is a general use, epoxy paste compound that bonds to wet surfaces by displacing water from the substrate....

RotFix is an ultra-low viscosity epoxy that penetrates deeply into soft, punky wood substrates. Unlike many popular “penetrating” epoxies, RotFix...

Borate Rods are an easy, low-cost decay protection and prevention system for wood. They have an appearance similar to glass rods and are available ...

Why replace when you can restore? Rot is a fungus and it can spread quickly, infecting, and then destroying sound wood in its path. Replacement can...

Blade Pro epoxy adhesive is a two-component, high-performance glue designed specifically for the knife maker.  This state-of-the-art adhesive forms...

MirrorCoat is a pourable, self-leveling bar and tabletop coating. It works well on many surfaces such as wood, ceramics, plaster, masonry and some ...

Cold Cure is a blush resistant, two-part epoxy laminating and coating resin that excels in foul weather conditions.  It cures in cold, damp, and hu...

Quick Cure 15Quick Cure-15 is the standard quick setting "fifteen minute epoxy" system. Mix at a 1:1 by volume ratio. Quick Cure is ideal for all s...

T-88 is a two-part, high-performance structural epoxy adhesive. Use T-88 in woodworking and marine applications. It exhibits outstanding adhesion...

GelMagic is a toughened, non-sagging, two component, structural epoxy adhesive designed for superior bonding to wood and most porous materials. It ...

SculpWood Putty is a one of four components making up the EndRot system. It’s a nonshrinking, two-part epoxy putty compound ideal for filling voi...

MetlWeld is a super tough epoxy adhesive designed to bond dissimilar materials such as steel, wood, and rubber. MetlWeld exhibits excellent elastic...

Exhibits outstanding adhesion on a wide variety of materials May be used to glue damp wood provided T-88 is worked well into the surface Available...