Fillers and Additives
Filters
Colodial / Fumed Silica
Ark Composites5.0 / 5.0
2 Reviews
An excellent thixotropic agent which is used to control the flow qualities of epoxy or fiberglass resin. In small quantities, it reduces the tenden...
View full detailsWood Flour
Ark CompositesA light-brown, flour-like, wood by-product most commonly used to thicken epoxy resin to a peanut-butter consistency for filleting (radiusing inside...
View full detailsWest System 406 Colloidal Silica Epoxy Filler
West System4.5 / 5.0
2 Reviews
West System 406 Colloidal Silica is a thickening additive that controls the viscosity of epoxy and prevents runoff in vertical and overhead joints....
View full details3M Bubbles
3M3M Glass Bubbles K series are hollow, low-density soda-lime-borosilicate glass microspheres designed as high-strength fillers for composites, s...
View full detailsWest System 404 High-Density Epoxy Adhesive Filler
West System4.5 / 5.0
2 Reviews
West System 404 High-Density Filler is a thickening additive developed for maximum physical properties in hardware bonding where high cyclic loads ...
View full detailsWest System 410 Microlight Epoxy Fairing Filler
West SystemWest System 410 Microlight is the ideal low-density filler for a light, easily worked fairing compound, especially for fairing large areas. It mixe...
View full detailsWest System 407 Low-Density Epoxy Fairing Filler
West System5.0 / 5.0
1 Review
West System 407 Low-Density Filler is a blended microballoon-based filler used to make fairing putties that are easy to sand or carve. It is reason...
View full detailsWest System 403 Microfibers Epoxy Adhesive Filler
West SystemWest System 403 Microfibers is a fine fiber blend used to thicken West System epoxy into a multipurpose adhesive, especially for bonding wood. Epox...
View full detailsMicroballoons
Ark CompositesHollow reddish brown spheres used to make light weight fairing & filleting compounds. Good sanding feather edge sanding properties. Slightly be...
View full detailsMilled Glass Fibers
Ark CompositesThese are ground glass fibers that add moderate strength when added to resin. Shorter than Chopped Strand, they make a fiberous jelly-like product,...
View full detailsMAS Cell-O-Fill – Low-Density Structural Epoxy Filler
MASMAS Cell-O-Fill is a thixotropic cellulose-fibre filler for epoxy. Use it in place of Colloidal Silica when you need high strength with low density...
View full detailsCotton Fiber
Ark CompositesUsed as an epoxy thickener for strength and gap filling properties and to makes glues with good wetting ability. Colodial / Fumed Silica can be add...
View full detailsNon Skid Granules Propyltex 50
Ark CompositesNon abrasive paint additive to produce anti skid decks. When mixed with epoxy, latex or oil-based paints, stains, or sealers, it creates a skid-re...
View full detailsWest System 405 Filleting Blend Epoxy Adhesive Filler
West SystemWest System 405 Filleting Blend is a strong, wood-toned filler for glue joints and fillets on naturally finished wood. It mixes easily with epoxy, ...
View full detailsWest System 423 Graphite Powder Epoxy Additive
West System423 Graphite Powder is a fine black powder mixed into West System epoxy to make a low-friction exterior coating with better scuff resistance and du...
View full detailsChopped Glass Strands
Ark CompositesThin glass fibers chopped to 1/4” lengths. Chopped Strand adds strength and gap filling to any mixture of fillers and resin. This can be added to ...
View full detailsMAS Phenolic Microballoons – Low-Density Fairing Filler
MASMAS Phenolic Microballoons are ultra-light, hollow phenolic spheres that turn epoxy into a low-density fairing and filling compound. Once cured, th...
View full detailsArkthix
Ark CompositesThickening additive for epoxy, polyester and vinyl ester resins. Mixes easily into resin without floating. Easy sanding and spreading. Use in plac...
View full detailsMAS Colloidal Silica – Sag-Resistant Structural Epoxy Filler
MASMAS Colloidal Silica is a high-density thickening filler for epoxy. Mixed into MAS 2:1 Non-Blushing or Traditional Marine epoxy, it controls flow a...
View full detailsMAS Milled Fibers – High-Strength Structural Epoxy Filler
MASMAS Milled Fibers are milled fibreglass strands for epoxy. Use them when a filled epoxy must bridge a void and deliver very high strength and resis...
View full details