Polyester, Gelcoat and Acetone

Epoxy and Polyester pigment is used for adding color to new projects or color-matching repairs. Universal pigment, can be used in Epoxy, Polyester ...

MEK Peroxide Hardener is a powerful additive for curing polyester resin and gelcoat in the marine industry. It is a crucial component in the manufa...

Adding or replacing flotation in a small boat? This 2 lb two-part pour foam fills under seats, inside bow and stern compartments, and other empty s...

Building up a hull repair, glassing a new deck or laminating stringers? Unwaxed polyester resin is the go-to fiberglass resin for marine layup. Wit...

USED FOR:  Thinning Gelcoat Polyester and Epoxy Resins Cleaning, Degreasing, Dewaxing, Tools, Fiberglass and Epoxy Surfaces May damage Paint, Var...

Everything you will need to tint and repair white and off damaged white Gelcoat. Repair holes and delaminated fiberglass with Ark Fiberglas Repair ...

CarbonBond Pourable Transom Compound (PTC) from Carbon-Core Corporation is a ceramic-filled polyester pourable compound for net-shape transom corin...

The last layer of a fiberglass job needs to cure hard and dry, not tacky. That's what waxed polyester resin does. Wax in the resin rises and seals ...

Repairing chips, gouges or a fiberglass patch on a white hull or deck? This waxed white gelcoat is made for the final, visible layer. It's thick en...

Transform your boat insulation project with the 12 Lb Polyurethane Expanding Foam. This closed cell spray foam offers an expansion rate of 5 times,...

 Air Dry is used to add to polyester/vinylester resins to eliminate the tackiness in the resin surface. The wax rises to the surface as the styrene...

Styrene is the recommended thinner when using polyester and vinyl ester resins and gel coats. All polyester and vinyl ester resins contain styrene ...

Gelcoat is a polyester resin specially formulated with thixotropic ingredients for increased viscosity and non-sag properties. It incorporates pigm...

Looking for a reliable mold release solution for your composite molding projects? Look no further than our firm paste wax made with the finest Carn...

If you're building or re-skinning a hull that will sit in the water, osmotic blistering is the problem to plan for. AOC H034 promoted vinyl ester r...

Everything you will need to tint and repair any color Gelcoat. A gelcoat repair kit that repairs holes and delaminated fibreglass in conjunction wi...

PVA (Poly Vinyl Alcohol) Provides a very compatible and reliable release barrier for polyester, vinyl ester and epoxy composites. Mold release agen...

Kit consists of 250 ml waxed gelcote with hardener and 1" brush. . Add polyester paste coloring to white for off white and to neutral gelcote for s...

16 ounce Adjustable Volume Dispenser delivers up to 30 cc of fluid accurately and safely in 5 CC increments.

Blended with gelcoats for gelcoat repairs; blended with tooling gelcoats to upgrade mold surfaces. Low Porosity---when  used for repairs, blending ...

Gel coat is a polyester resin specially formulated with thixotropic ingredients for increased viscosity and non-sag properties. It incorporates pig...

Gelcoat is a polyester resin specially formulated with thixotropic ingredients for increased viscosity and non-sag properties. It incorporates pigm...

F26 is a water resistant, low-density polyester-based fairing compound. F26 has good adhesion to cured fiber-reinforced polyester and vinylester la...

Tooling Gelcoat Orange Brushing is a specialized gelcoat material that is specifically designed for use in the marine industry. This gelcoat is use...