3M Accuspray Atomizing Heads | 4-Pack Refills 1.2–2.0 mm | Noah's Marine - Noah's Marine Skip to content

3M Accuspray Atomizing Head

SKU 16609
by 3M
Original price $44.07 - Original price $44.07
Original price
$44.07
$44.07 - $44.07
Current price $44.07

3M Accuspray atomizing heads are replaceable, see-through nozzles sold in kits of four, for 3M Accuspray ONE spray guns and 3M PPS cup systems. A colour tint identifies the orifice size. Heads can be cleaned and reused, or swapped for a fresh head when you want the spray performance of a new nozzle without rebuilding the gun.

These listings are the Accuspray 16xxx heads, not the 3M Performance Gravity HVLP 267xx heads used on the Performance Spray Gun, and not the later Accuspray “for PPS Series 2.0” 266xx refill packs. Official 3M copy states that the 16xxx heads work with Accuspray ONE guns and PPS systems. If you are spraying with a Performance Spray Gun, use the 267xx gravity HVLP heads instead.

Each variant below is a 4-pack of one size. Choose the size that matches your coating and your Accuspray gun. 3M’s published guidance, summarized:

  • 1.2 mm blue (16615) and 1.3 mm green (16614) — very fine atomization for low-viscosity coatings such as waterborne and solvent basecoats, thin clear coats, stains, varnishes, mould-release agents, and aerospace or marine top coats. These air caps include atomizing air holes for finish quality, and 3M notes they are useful for reduced overspray in hot, humid conditions.
  • 1.4 mm orange (16612) — fine atomization with minimal overspray for lower-viscosity materials such as automotive sealer, paint, topcoats, lacquers and light adhesives.
  • 1.8 mm clear (16611) — medium- to high-viscosity coatings such as automotive primers, lacquers and adhesives.
  • 2.0 mm red (16609) — typically used with the Accuspray HGP spray gun for high-volume, high-viscosity fluids such as gel coats, adhesives, undercoatings, high-build primers, specialty and sound-dampening coatings.

Variants in this listing

SKU Size / colour 3M ID UPC / GTIN Pack
16615 1.2 mm, blue 7100086837 00051131166158 4 heads
16614 1.3 mm, green 7100086806 00051131166141 4 heads
16612 1.4 mm, orange 7100017731 00051131166127 4 heads
16611 1.8 mm, clear 7000000500 00051131166110 4 heads
16609 2.0 mm, red 7000045543 00051131166097 4 heads

3M packs six of these 4-packs to a case. This page sells one 4-pack of the size you select. The on-gun marking for the 1.2 mm blue head includes a maximum of 20 psi (1.38 bar); follow the Accuspray gun instructions for your model (including HG18, HG14 and HGP where applicable).

A standalone official 3M technical data sheet and safety data sheet for the plastic atomizing head itself were not available as clean, official PDFs at the time of this update. Use the documentation that came with your Accuspray gun, and consult the SDS for the coating or solvent you are spraying. You can search 3M Canada’s SDS library for a current regional sheet. For industrial or occupational use only; not for consumer sale or use.

Related items at Noah’s Marine include the 3M Accuspray ONE Spray Gun System Kit and, for the Performance Spray Gun, the 26730 gravity HVLP variety kit.