Ark Composites

Styrene is the recommended thinner when using polyester and vinyl ester resins and gel coats. All polyester and vinyl ester resins contain styrene ...

Hollow reddish brown spheres used to make light weight fairing & filleting compounds. Good sanding feather edge sanding properties. Slightly be...

1 Ounce measuring or mixing container.

 ASSEMBLY Push extension tube firmly into the bottom of the BLUE DOT pump, this is the ARK Resin Pump.  Hold the pump against the side  of the resi...

Key Details Marine Paint Stripper for antifouling, varnish and paint Safe on Gelcoat, Fiberglass, Wood and Fittings Works on Vertical Surfaces Doe...

Gel coat is a polyester resin specially formulated with thixotropic ingredients for increased viscosity and non-sag properties. It incorporates pig...

PVA (Poly Vinyl Alcohol) Provides a very compatible and reliable release barrier for polyester, vinyl ester and epoxy composites. Mold release agen...

16 ounce Adjustable Volume Dispenser delivers up to 30 cc of fluid accurately and safely in 5 CC increments.

Used as an epoxy thickener for strength and gap filling properties and to makes glues with good wetting ability. Colodial / Fumed Silica can be add...

Blended with gelcoats for gelcoat repairs; blended with tooling gelcoats to upgrade mold surfaces. Low Porosity---when  used for repairs, blending ...

These are ground glass fibers that add moderate strength when added to resin. Shorter than Chopped Strand, they make a fiberous jelly-like product,...

Everything you will need to tint and repair any color Gelcoat. A gelcoat repair kit that repairs holes and delaminated fibreglass in conjunction wi...

Container lid  

The MEK Wash Bottle is an indispensable tool for marine maintenance and repair tasks, specifically designed for dispensing Methyl Ethyl Ketone (MEK...

Talc is a white to greyish-white fine powder which is made from finely ground talc, an extremely soft mineral compound composed of magnesium silica...

Tooling Gelcoat Orange Brushing is a specialized gelcoat material that is specifically designed for use in the marine industry. This gelcoat is use...

Thin glass fibers chopped to 1/4” lengths. Chopped Strand adds strength and gap filling to any mixture of fillers and resin. This can be added to ...

Mixing ratio by volume 2:1 MIXING:  Mix 2 parts Ark Epoxy Resin with 1 part Ark Hardener.  Use graduated containers or pumps to measure, don’t gues...

All-in-one fiberglass boat repair kit with resin, hardener, tools and instructions. Restore cracks, holes and gouges in your boat, ATV, RV or other...

Gelcoat is a polyester resin specially formulated with thixotropic ingredients for increased viscosity and non-sag properties. It incorporates pigm...

Kit consists of 250 ml waxed gelcote with hardener and 1" brush. . Add polyester paste coloring to white for off white and to neutral gelcote for s...

Non abrasive paint additive to produce anti skid decks.  When mixed with epoxy, latex or oil-based paints, stains, or sealers, it creates a skid-re...