Epoxy, Polyester and Adhesives

Epoxy and Polyester pigment is used for adding color to new projects or color-matching repairs. Universal pigment, can be used in Epoxy, Polyester ...

Looking for a versatile and reliable epoxy resin for your next project? Look no further than Ark Composites 2:1 Epoxy Resin! With a low viscosity w...

MEK Peroxide Hardener is a powerful additive for curing polyester resin and gelcoat in the marine industry. It is a crucial component in the manufa...

An excellent thixotropic agent which is used to control the flow qualities of epoxy or fiberglass resin. In small quantities, it reduces the tenden...

ARK COMPOSITES EPOXY RESIN 2:1 RATIO CLEAR NO BLUSH LOW VISCOSITY SYSTEM USE TO:                 Coat and waterproof wood, metal, most porous surfa...

Most popular resin for marine applications. Excellent for all types of fiberglass lamination, layup, and repair work. In unwaxed resins, the top la...

USED FOR:  Thinning Gelcoat Polyester and Epoxy Resins Cleaning, Degreasing, Dewaxing, Tools, Fiberglass and Epoxy Surfaces May damage Paint, Var...

Low water absorption, 97% closed cell content. One quart of mixed foam supports approximately 63 lbs/cubic foot. Six month shelf life. A low densit...

A light-brown, flour-like, wood by-product most commonly used to thicken epoxy resin to a peanut-butter consistency for filleting (radiusing inside...

Transform your boat insulation project with the 12 Lb Polyurethane Expanding Foam. This closed cell spray foam offers an expansion rate of 5 times,...

Waxed polyester resin is the most popular resin used for marine applications. It is excellent for all types of fiberglass lamination, layup, and re...

 Air Dry is used to add to polyester/vinylester resins to eliminate the tackiness in the resin surface. The wax rises to the surface as the styrene...

ARK COMPOSITES EPOXY RESIN 2:1 RATIO CLEAR NO BLUSH LOW VISCOSITY SYSTEM USE TO:                 Coat and waterproof wood, metal, most porous surfa...

 ASSEMBLY Push extension tube firmly into the bottom of the BLUE DOT pump, this is the ARK Resin Pump.  Hold the pump against the side  of the resi...

ARK Epoxy Resin Kit The ARK Epoxy Resin Kit is a versatile epoxy for repairs, reinforcement and waterproofing of a wide range of materials. The kit...

Styrene is the recommended thinner when using polyester and vinyl ester resins and gel coats. All polyester and vinyl ester resins contain styrene ...

Mixing ratio by volume 2:1 MIXING:  Mix 2 parts Ark Epoxy Resin with 1 part Ark Hardener.  Use graduated containers or pumps to measure, don’t gues...

Used as an epoxy thickener for strength and gap filling properties and to makes glues with good wetting ability. Colodial / Fumed Silica can be add...

16 ounce Adjustable Volume Dispenser delivers up to 30 cc of fluid accurately and safely in 5 CC increments.

These are ground glass fibers that add moderate strength when added to resin. Shorter than Chopped Strand, they make a fiberous jelly-like product,...

Hollow reddish brown spheres used to make light weight fairing & filleting compounds. Good sanding feather edge sanding properties. Slightly be...

Thin glass fibers chopped to 1/4” lengths. Chopped Strand adds strength and gap filling to any mixture of fillers and resin. This can be added to ...

Non abrasive paint additive to produce anti skid decks.  When mixed with epoxy, latex or oil-based paints, stains, or sealers, it creates a skid-re...

Can be used as an alternative to polyester and epoxy materials in matrix or composite materials, where its characteristics, strengths, and bulk cos...