Marine Epoxies and Resins

405 Filleting Blend Adhesive Filler is a strong, wood-toned epoxy filler. Add it to your epoxy mix when making epoxy joints and fillets on naturall...

 ASSEMBLY Push extension tube firmly into the bottom of the BLUE DOT pump, this is the ARK Resin Pump.  Hold the pump against the side  of the resi...

Gelcoat is a polyester resin specially formulated with thixotropic ingredients for increased viscosity and non-sag properties. It incorporates pigm...

Tooling Gelcoat Orange Brushing is a specialized gelcoat material that is specifically designed for use in the marine industry. This gelcoat is use...

Kit consists of 250 ml waxed gelcote with hardener and 1" brush. . Add polyester paste coloring to white for off white and to neutral gelcote for s...

SculpWood Max is a reinforced, high-compressive strength, two-part epoxy putty compound. It has 4X the compressive strength of standard SculpWoo...

SUBMARINE UNDERWATER EPOXY Submarine is a general use, epoxy paste compound that bonds to wet surfaces by displacing water from the substrate....

RotFix is an ultra-low viscosity epoxy that penetrates deeply into soft, punky wood substrates. Unlike many popular “penetrating” epoxies, RotFix...

Why replace when you can restore? Rot is a fungus and it can spread quickly, infecting, and then destroying sound wood in its path. Replacement can...

Blade Pro epoxy adhesive is a two-component, high-performance glue designed specifically for the knife maker.  This state-of-the-art adhesive forms...

MirrorCoat is a pourable, self-leveling bar and tabletop coating. It works well on many surfaces such as wood, ceramics, plaster, masonry and some ...

Here is everything you need to complete small repairs around the boat, shop or home. The Handy Repair Pack contains two WEST SYSTEM 105 Resin/205 H...

A thickened, easy-to-use epoxy that permanently bonds fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. G/flex is toughened...

This kit contains 4 fl. oz. G/flex 650 resin, 4 fl. oz. G/flex 650 hardener (8 fl. oz. mixed epoxy), 2 reusable mixing stick/applicators, 2 12-cc s...

Six10® Thickened Epoxy Adhesive combines the strength and reliability of a two-part WEST SYSTEM® Brand Epoxy with point-and-shoot convenience. The ...

EZ-Fillet is a wood flour-filled two-part putty specifically designed for stitch-and-glue wooden boat construction. Its ketchup-like, self-leveling...

Cold Cure is a blush resistant, two-part epoxy laminating and coating resin that excels in foul weather conditions.  It cures in cold, damp, and hu...

Quick Cure 15Quick Cure-15 is the standard quick setting "fifteen minute epoxy" system. Mix at a 1:1 by volume ratio. Quick Cure is ideal for all s...

When mixed with your epoxy Phenolic Microballoons can be used as a fairing or filleting compound. These microballoons are a low density, light weig...

For use when epoxy must fill a void and provide extremely high strength and resistance to cracking (i.e. structural filleting, bonding of hardware,...

MAS Slow Hardener is a phenol-free, modified amine, epoxy resin hardener. When used in conjunction with MAS Epoxy Resin it provides high reactivity...

Hollow reddish brown spheres used to make light weight fairing & filleting compounds. Good sanding feather edge sanding properties. Slightly be...

Non abrasive paint additive to produce anti skid decks.  When mixed with epoxy, latex or oil-based paints, stains, or sealers, it creates a skid-re...

These are ground glass fibers that add moderate strength when added to resin. Shorter than Chopped Strand, they make a fiberous jelly-like product,...