System Three RotFix Penetrating Epoxy Wood Sealer
SKU RF3
by System Three
Original price
$19.25
-
Original price
$124.43
Original price
$19.25
$19.25
-
$124.43
Current price
$19.25
System Three RotFix is an ultra-low-viscosity, solvent-free epoxy that penetrates deep into soft, punky wood and hardens it. It acts as a chemical bonding primer for SculpWood Putty and Paste, and the combination gives a permanent repair that will not shrink or crack. RotFix can also be used on its own to firm up punky wood before priming and painting.
Features
- Penetrates deeply into punky wood
- Solvent-free and low odour
- Cures over damp wood
- Compatible with most water- and solvent-based primers and paints
- 2:1 mix ratio
Recommended Uses
- First epoxy step in EndRot rot repairs, before SculpWood Putty or Paste
- Consolidating soft wood on sills, frames and trim before painting
- Note: RotFix does not kill rot fungus. Treat the wood with borate first
Specifications
| Property | Details |
|---|---|
| Mix ratio by volume | 2:1 (resin:hardener) |
| Mix ratio by weight | 100:43 |
| Working time @ 70°F (21°C) | 5-10 minutes |
| Mixed viscosity | 275 cps |
| Maximum batch size | 9 oz |
| Minimum application temperature | 35°F (2°C) |
| Maximum working temperature | 90°F (32°C) |
| Recoat without sanding @ 70°F (21°C) | 6-72 hours |
| Time to sand @ 70°F (21°C) | 24 hours |
| Full cure @ 70°F (21°C) | 3 days |
| VOC content | 0 |
| Available sizes | 3 oz kit, 24 oz (1.5 Pint) kit and 1.5 Quart kit |
Data Sheets
