Kiwigrip Roller
Use the KiwiGrip texture roller to form the textured finish in KiwiGrip non-skid deck coating. This listing offers 4 Inch and 9 Inch sizes; choose the roller to suit the shape and working area of your deck.
Which size?
The manufacturer recommends the 4-inch roller for control on typical yacht decks. The 9-inch roller can be useful on large, flat areas, but curved or cambered decks may produce uneven pressure and texture with a wider roller.
How to use it
Spread a consistent layer of KiwiGrip with a brush or notched trowel, then roll small sections while maintaining a wet edge. Use light finishing passes to even the texture. For a more aggressive finish, test back-rolling as the coating partially dries, before it becomes too tacky to work. Timing depends on the conditions; do not use a fixed waiting time for every job.
Practice on a test panel first. Fine textures give less wet slip resistance, so choose a texture appropriate to the area. Remove masking tape while the coating is wet and follow KiwiGrip's surface preparation and drying guidance.
Clean after use
Wash the roller thoroughly with fresh water while the coating is still fresh. This is a texturing tool, not a substitute for the coating or for a smooth roll-and-tip finishing brush.
Use with KiwiGrip non-skid deck coating. See the coating page for manufacturer application and safety downloads.