System Three SilverTip Laminating Epoxy Resin (Part A)
SKU STR1G
by System Three
Original price
$76.53
-
Original price
$814.06
Original price
$199.46
$76.53
-
$814.06
Current price
$199.46
System Three SilverTip Laminating Epoxy Resin (Part A) is the resin side of the SilverTip system. It mixes 2:1 by volume with SilverTip fast or slow hardener and cures crystal-clear and blush-free. Its low viscosity wets out fibreglass, Kevlar, Dynel and carbon fibre with ease.
Features
- Low viscosity for fast fabric wet-out
- Crystal-clear, blush-free cure with either hardener
- Superior defoaming
- Contains no VOC
- 2:1 resin:hardener by volume
Recommended Uses
- Refill resin for SilverTip laminating, coating and brightwork
Specifications
| Property | Details |
|---|---|
| Mix ratio by volume | 2:1 (resin:hardener) |
| Mix ratio by weight | 100:44 |
| Working time @ 70°F (21°C) | Fast: 30-35 min; Slow: 45-50 min |
| Minimum application temperature | Fast: 35°F (2°C); Slow: 55°F (13°C) |
| Recoat without sanding @ 70°F (21°C) | Fast: 3-72 hours; Slow: 6-72 hours |
| Time to sand @ 70°F (21°C) | Fast: 14-16 hours; Slow: 24 hours |
| Full cure @ 70°F (21°C) | 3 days |
| Resin viscosity @ 77°F (25°C) | 700 cps |
| Hardness | Shore D 80 |
| Tensile strength (ASTM D638) | 7,900 psi |
| Flexural strength (ASTM D790) | 13,000 psi |
| Heat deflection temperature | 128°F (53°C) |
| Maximum service temperature | 160°F (71°C) |
| VOC content | 0 |
| Available sizes | 1 Quart, 1 Gallon and 5 Gallon |
Data Sheets