Skip to content


3M Aluminium Restorer 18 Oz

SKU 09020
by 3M
Original price $41.82 - Original price $41.82
Original price
$41.82 - $41.82
Current price $41.82
Restores the beauty and luster to aluminum. Removes heavy oxidation, and chalking, and turns back the clock on the effects of weathering on aluminum. 3M Marine Aluminum Restorer and Polish comes in a concentrated formula so a small amount provides a lot of restoration and polishing and can be applied by hand or machine.
3MTM Marine Aluminum Restorer and Polish revives the appearance of aluminum throughout boats by aggressively removing oxidation and stains. Use this product to restore the beauty and pride of ownership in your boat.

Formulated specifically to make aluminum shine, 3MTM Marine Aluminum Restorer and Polish removes the weathering effects that diminish the lustrous appearance of aluminum over time. Aluminum is especially vulnerable to oxidation and chalking because of all the outdoor exposure. 
Over time weathering effects rob aluminum of its brilliance and make it look old and fatigued. This product is ideal for cleaning and polishing aluminum deck hardware, cleats, through-hulls, stanchions, rails, and ladders.

The product is formulated to remove heavy oxidation and restore shine to either bare or painted aluminum. For painted aluminum, 3MTM recommends testing on a small inconspicuous area to determine the effect. 3MTM Aluminum Restorer and Polish has a light abrasive action that will restore the original luster. It will restore high gloss surfaces to a highly polished look, while brushed and matte finishes will be restored to original color and luster.

Before using this product, please reference the Product Label and/or Safety Data Sheet for Health and Safety Information.

Hand Application: Apply a small amount of material to a small area using a Detail Cloth. Rub aggressively using short strokes. Keep turning the cloth as more material is applied. Buff to a high luster using a clean, soft cloth. Do not stop and allow to haze.
Machine Application: Apply with an air or electric buffer (1,400-2,000 Max. RPM) equipped with a Pad. Apply a sufficient amount of material to boat surface to work a 2 foot by 2-foot area. Before starting the machine, spread the material with a buffing pad to reduce the slinging of material and clean up. Buff using light to medium pressure in a consistent and uniform pattern. Reduce pressure when the material begins to dry. Repeat if needed.
For best results, use machine application.
Data Sheets