3M™ PPS™ Series 2.0 Spray Cup System Kit 26000, Standard (22 fl oz, 650 mL), 200 Micron Filter
3M™ PPS™ Series 2.0 Spray Cup System Kit 26000 is the standard (22 fl oz / 650 mL) disposable linered spray-cup kit with a built-in 200-micron filter. It is used to mix, measure, filter and spray solvent-borne or waterborne coatings with a compatible spray gun. 3M specifies this product for industrial or occupational use only; it is not for consumer sale or use.
What’s in the kit
Each case is one kit and, per 3M, contains:
- 50 disposable lids with integrated collars and full-diameter 200-micron filters
- 50 disposable liners
- 1 reusable hard cup, marked with mixing ratios, fill lines and a maximum mix volume of 650 mL (22.0 oz)
- 32 sealing plugs
A 3M™ PPS™ Series 2.0 spray-gun adapter is required and is not included in this kit. Choose the adapter that matches your gun using the part-number and adapter guide below. Existing red 3M PPS dispensers can be used with Series 2.0 lids and liners. A 12-pack standard refill (part 26173) with the same 200-micron lids and liners is also listed at Noah’s Marine.
Using the cup
3M’s technical data sheet gives this basic sequence: insert a liner in the hard cup and mix the coating in the liner; place the lid on the cup, align the black portion of the quarter-turn lock with the access window, then push down and twist to lock; fit the correct adapter to the lid with a push-and-twist until it locks. After spraying, disconnect the air line, invert the gun and pull the trigger so unused material returns to the liner; a gentle tap helps break surface tension. To remove the lid and liner together, twist the lid to unlock, put fingers through the hole in the bottom of the hard cup and push the liner up. Use a sealing plug to close unused coating, following local rules; the wide plug can stand the cup upside down to help keep the filter mesh wet. Dispose of used lids and liners according to local requirements.
Because this is a closed system, 3M states that the gun can be sprayed in any orientation, including upside down. The domed lid is designed to hold up to 90 mL (3 fl oz) of material below the filter. Consult the coating manufacturer for the recommended filter mesh; this kit is the 200-micron version. The 125-micron standard kit is a different part number (26301) and is not this item.
Product specifications
| Property | Details |
|---|---|
| Brand | 3M™ PPS™ Series 2.0 |
| 3M part number | 26000 |
| 3M ID | 7100284557 |
| UPC | 00051131260009 |
| Cup size | Standard |
| Capacity / max. mix volume | 650 mL (22 fl oz), as marked on the cup |
| Filter | 200 micron, built into each lid |
| Pack | 1 kit per case: 50 lids, 50 liners, 32 sealing plugs, 1 hard cup |
| Materials (3M TDS) | Liner: LDPE. Lid: polypropylene. Filter: Nylon 6 |
| Intended use | Industrial / occupational. Not for consumer sale or use |
Downloads and application guidance
- Download 3M PPS Series 2.0 Technical Data Sheet — English, effective 19 August 2020 (PDF)
- Download 3M PPS Series 2.0 Spray Cup System brochure — official 3M Automotive Aftermarket edition, 2026, document 60-4405-0171-0 (PDF)
- Download 3M PPS Series 2.0 part number and spray-gun adapter guide (PDF)
3M does not publish a product Safety Data Sheet for this cup kit in the documents located for this listing. The technical data sheet directs users to the Safety Data Sheet for the paint or solvent being mixed, together with local regulations, for safe use, storage and disposal. Use the personal protective equipment required by a workplace risk assessment and by the coating manufacturer.