MAS Cell-O-Fill – Low-Density Structural Epoxy Filler
MAS Cell-O-Fill is a thixotropic cellulose-fibre filler for epoxy. Use it in place of Colloidal Silica when you need high strength with low density: it thickens MAS 2:1 Non-Blushing or Traditional Marine epoxy for bonding, filling and filleting without adding much weight, and it gives improved sag resistance on vertical surfaces. MAS describes it as non-toxic and non-carcinogenic.
Features
- High strength with low density, for lighter bonds and fillets
- Thixotropic: improved vertical sag resistance
- Use in place of Colloidal Silica where weight matters
- Non-toxic and non-carcinogenic
- Compatible with MAS 2:1 Non-Blushing and Traditional Marine epoxies
Recommended Uses
- Bonding and glue joints
- Fillets and gap filling
- Lightweight structural putties
Specifications
| Property | Details |
|---|---|
| Type | Cellulose fibre thickening filler |
| Appearance | White fibres |
| Sizes | 1 quart, 1/2 gallon |
| Use with | MAS 2:1 Non-Blushing and Traditional Marine epoxies |
Safety and storage: MAS Cell-O-Fill is labelled WARNING: may form combustible dust concentrations in air. Wear safety glasses, gloves and a dust mask when handling the dry powder, and work in a well-ventilated area. Once mixed into epoxy, follow the resin and hardener safety data sheets. Store in the original container, tightly closed and dry. For safety information, refer to the Safety Data Sheet below.
Data Sheets