System Three SilverTip Laminating Epoxy Resin Kit
SKU ST1.5GF
by System Three
Original price
$127.53
-
Original price
$351.10
Original price
$351.10
$127.53
-
$351.10
Current price
$351.10
System Three SilverTip Epoxy is a crystal-clear, blush-free laminating epoxy system for wood-composite boat building and brightwork. Its low viscosity wets out fibreglass, Kevlar, Dynel and carbon fibre with ease and with little tendency to foam or float the fabric. Choose the fast or slow hardener; either cures blush-free, so secondary bonding is simple.
Features
- Fast or slow hardener to suit your temperature and job
- Cures without amine blush with either hardener
- Recoat without sanding within 72 hours
- Superior defoaming with little tendency to float the fabric
- Contains no VOC
- Easy 2:1 mix ratio
Recommended Uses
- Fibreglass, Kevlar, Dynel and carbon fibre laminating
- Clear coating brightwork under varnish
- Sealing and coating wood in boat building
Specifications
| Property | Details |
|---|---|
| Mix ratio by volume | 2:1 (resin:hardener) |
| Mix ratio by weight | 100:44 |
| Working time @ 70°F (21°C) | Fast: 30-35 min; Slow: 45-50 min |
| Minimum application temperature | Fast: 35°F (2°C); Slow: 55°F (13°C) |
| Recoat without sanding @ 70°F (21°C) | Fast: 3-72 hours; Slow: 6-72 hours |
| Time to sand @ 70°F (21°C) | Fast: 14-16 hours; Slow: 24 hours |
| Full cure @ 70°F (21°C) | 3 days |
| Resin viscosity @ 77°F (25°C) | 700 cps |
| Hardness | Shore D 80 |
| Tensile strength (ASTM D638) | 7,900 psi |
| Flexural strength (ASTM D790) | 13,000 psi |
| Heat deflection temperature | 128°F (53°C) |
| Maximum service temperature | 160°F (71°C) |
| VOC content | 0 |
| Available sizes | 1.5 Quart and 1.5 Gallon kits, each with fast or slow hardener |
Data Sheets